Posts Tagged ‘Motherboard’

MSI’s X79 Boards Hitting 5GHz with Core i7-3960X Extreme Edition on Air Cooling

January 3rd, 2012

The one-two combo of Intel’s X79 chipset and six-core Core i7-3960X Extreme Edition CPU is a potent one–especially, it seems, for overclockers. MSI reports that overclockers all over the world are juicing their Core i7-3960X Extreme Edition chips to 5GHz on X79-based MSI motherboards using air cooling alone.

MSI singled out one source, Guru 3D, which specifically hit 5.2GHz with an MSI X79A-GD65 (8D) board.

5GHz is nothing to sniff at, especially considering that the Core i7-3960X Extreme Edition has a stock clock of 3.3GHz (3.9GHz Turbo). MSI points to its Military-Class III components, including DrMOS II, as a reason why its boards can handle that kind of heat.

Whatever the reason, it’s exciting to see such performance from today’s components.

Source:http://hothardware.com/News/MSIs-X79-Boards-Hitting-5GHz-with-Core-i73960X-Extreme-Edition-on-Air-Cooling/

Gigabyte X79-UD3 Motherboard Obliterates X79 Overclocking Record with F7 BIOS

January 2nd, 2012

Back in the days of old, overclocking used to require setting DIP switches and chanting prayers to the gods of clockspeed and stability. There was a good chance you could burn something up, and if you did, the motherboard vendor would simply shrug. And today? Some of them will still shrug with indifference if you kill your hardware by overclocking, but the culture has changed dramatically. Not only do motherboard makers routinely tout overclocking-friendly features, but they actively participate in OCing competitions and are quick to brag when their gear is used to set new world records. Today is Gigabyte’s day to gloat.

Renowned overclocker “Hicoookie” achieved a new high clockspeed on the Intel Core i7 3930K processor by cranking the chip past 5.6GHz using a Gigabyte GA-X79-UD3 motherboard, the first mobo in the world to achieve a mulitplier of 57x.

“These new world records underline how the Gigabyte 3-way digital power engine on existing X79 motherboards makes breathtaking performance possible on our X79 series enthusiast platforms. They should also erase any skepticism regarding the performance and overclocking capabilities of our new F7 BIOS for Gigabyte X79 motherboards,” commented Tim Handley, Deputy Director of Motherboard Marketing at Gigabyte.

There was a bit of a scandal with Gigabyte recently when a YouTube video showed one of its X79 boards going up in smoke. Gigabyte released a BIOS update for several of its X79 boards to prevent such incidents from happening, and there were outcries that the new F7 BIOS would essentially gimp overclocking performance in order to mask potential hardware deficiencies. Hicookie’s achievement should erase those concerns. Check the live footage below…

Source:http://hothardware.com/News/Gigabyte-X79UD3-Motherboard-Obliterates-X79-Overclocking-Record-with-F7-BIOS/

Gigabyte X79-UD5 LGA 2011 Motherboard Review

December 29th, 2011

Introduction

Gigabyte is one of the most well known motherboard manufacturers in the world. Like many of its competitors its products cover a wide range of price points and market segments. Gigabyte even manufactures other types of computer parts such as cases and graphics cards. However, it is motherboards that Gigabyte is generally known best for.

The Gigabyte X79-UD5 is based off Intel’s X79 Express chipset. The X79 Express chipset is Intel’s most recent addition to its motherboard chipset lineup. This chipset was released to facilitate support for Intel’s Core i7 3xxx family processors based on the LGA2011 socket. Like the P67 and Z68 Express chipsets before it, the X79 is a unified design. Functionally X79 is not really much higher end than P67 or Z68, it simply supports the new LGA2011 CPUs. About the only performance enhancement X79 really got was the ability to support 64GB of RAM in up to four channels. P67 and Z68 only support dual memory channels and top out at 32GB of RAM.

Following Gigabyte’s typical naming convention, the suffix of “UD5″ indicates that the board is mid-range in the enthusiast model lineup. A “UD3″ would be more of a budget oriented offering while a “UD7″ would be high a higher end solution. Despite being more or less a mid-range board, being an LGA2011 board makes this a high end platform to begin with as all LGA2011 CPUs are hex cores at this point in time. And again, despite being a mid-range LGA2011 board, the feature list on the X79-UD5 is fairly impressive. The board supports CrossFireX as well as SLI, 3-Way SLI, and PCI-Express 3.0. It even supports SATA 6G and USB 3.0. This is no thanks to Intel’s lackluster support for this on the chipset side. The chipset supports only 2 SATA 6G devices and USB 3.0 support is provided by a third party chip as usual.

Like others in the market, Gigabyte has its own list of unique features which may or may not actually be all that unique, but are given catchy names which are unique to the company’s products. Gigabyte now has its “3D Power” feature which is digital control over the power phases of the board. In this case 3D refers to the two sets of memory channels and the CPU power phases. At least this is what I was able to decipher from the marketing speak on the Gigabyte product page for the X79-UD7. Another clever name is the “DualBIOS” which isn’t really unique to Gigabyte, but is assigned a catchy name on Gigabyte boards. This obviously referring to the dual BIOS ROMs on the motherboard providing the enthusiast with some redundancy should they need to recover from a bad BIOS flash or simply wish to switch over to the other one for a variety of reasons ranging from alternate settings to even alternate versions of the BIOS itself.

Additionally Gigabyte has its ON/OFF charge feature for charging for your phone even if the computer is powered down. The version of the Gigabyte X79-UD7 we received also came with a WiFi card and Bluetooth 4.0 support. Finally this is one of Gigabyte’s “Ultra Durable 3″ motherboards with a 2x copper PCB. The board therefore uses all Japanese solid-electrolytic capacitors, lower RDS MOSFETs, and Ferrite core chokes.

Packaging

The Gigabyte X79-UD7 comes in a white box with black text on it and despite being larger than cheaper board packaging tends to be, it’s pretty much standard fare for motherboard shipping. Our board arrived with all its accessories intact and damage free. Our PCB was marked “Rev 1.0.”

At this price point, Gigabyte isn’t shy with the accessories. Included are a user’s manual, quick start guide, utilities manual, GC-WiFi manual, driver discs for both the WiFi and the board itself, SATA cables, SLI & 3-Way SLI bridges, CrossFireX bridge, I/O shield, internal USB cable for the WiFi card, WiFi card, front panel USB 3.0 bay ports, dual WiFi antennas, and finally a metallic sticker with the Gigabyte logo on it.

Board Layout

The board features an almost exceptional layout. Lately I’ve been finding more and more to nit-pick about with many boards from virtually every brand. On the X79-UD5, I recognize only one thing which truly bothers me. The absolutely bone headed placement of the CMOS battery. You’d have to remove your primary graphics card to pull or replace the battery if it’s a dual slot card. Even with this glaring screw up in the design, the Gigabyte X79-UD5 layout is still better than that of some more expensive X79 boards I’ve seen. All power connectors, onboard switches, headers and expansion slots are really ideally placed for most people and most case installations.

The CPU socket area is easily accessible and fairly spaced well. I’m not really all that happy about flanking both sides of the CPU socket with memory slots as push/pull setups using large air coolers will probably block the use of at least one DIMM slot per bank. Your mileage may vary on this. Granted I think most people who will opt to go the Core i7 3930K / 3960X route will probably use either one of the self-contained watercooling units from Intel, Corsair, and Antec or more traditional water cooling hardware. I don’t see too many people running an LGA2011 board with an old fashioned air cooler at this point. The use of some type of liquid cooling makes the socket area work out just fine.

The board’s 8 DIMM slots flank the CPU socket. These are color coded grey and black to denote proper dual/quad channel operation and use a standard dual locking tab retention mechanism found on most boards today. The tabs at least match on all the DIMM slots. Some boards use two different styles of locking tabs alternating between color coded slots, which I find atrocious. There is also plenty of room to add or remove modules even with large video cards installed in the system. Only your choice of CPU cooler could cause problems with this area.

The X79 chipset is a unified chipset so there is no north bridge. The “north bridge” can be found where the south bridge would have been on an X58 board. Directly in front of that are the 10 SATA ports the motherboard has, tied to various controllers. The X79’s controllers are black and white, where white denotes SATA III / 6G capability, while the black ports are SATA II / 3G compatible only. Curiously, the board’s Marvell 9172 controller ports are separated by a couple of inches from the X79 ports. These are all SATA III / 6G capable and are all color coded gray. I really like how Gigabyte chose to color code these in such a way as to make figuring out which ports belong to which controller easy enough. Also the location of these means that with larger video cards, only some of them may end up being difficult to reach. All are right angled at least, and all support locking SATA cables. A must in my mind.

The expansion slot area is done extremely well aside from the moronic placement of the CMOS battery. I could take or leave the legacy PCI slot, but other than that, I think this is optimal. Gigabyte correctly chose to allocate 16 lanes to the top and bottom PCIe x16 slots and leave the middle one an x8 slot. This allows full bandwidth and tons of space in between when running two cards SLI or Crossfire. However all three slots drop to x8 mode when 3-Way SLI or 3 card CrossFireX are used. PCIe x1 slots are out of the way.

The rear I/O panel is packed with ports. 7 USB 2.0 ports, 2 USB 3.0 ports, 1 RJ-45 LAN port, 1 optical output, 5 mini-stereo jacks, 1 IEEE1394a port, 1 PS/2 keyboard or mouse port, 2 eSATA ports (one of which is a combination USB 2.0 port), 1 BIOS switch button, and finally a 1 touch OC button.

Source:http://www.hardocp.com/article/2011/12/28/gigabyte_x79ud5_lga_2011_motherboard_review

Gigabyte Issues Emergency BIOS Update for Certain X79 Series Motherboards

December 28th, 2011

Overclocking used to be a dark art reserved for a power users who didn’t mind taking potentially catastrophic risks in order to squeeze a few more ounces of free performance out of their components. Things have changed dramatically in recent years, but lest anyone forget, overclocking can still be dangerous, even with all of the modern day safe guards. YouTube user “japan0827″ found this out the unfortunate way when his overclocked system went up in smoke…literally.

He was using a Gigabyte X79-UD3 motherboard and narrowed the culprit down to a faulty MOSFET that couldn’t handle the stress from the board’s CPU VRM. Pictures are littered all over the Web on various forums, and they aren’t pretty. Unfortunately, the problem is more serious than bad part on a single motherboard.

“It has come to our attention that certain X79 Series motherboards (see models below) may malfunction due to excess heat when performing Extreme Overclocking beyond the board’s limit. To address this issue and to ensure our product is being used as intended, we urge existing X79 users to either visit Gigabyte’s official website to download and update their X79 series BIOS, or contact Gigabyte’s regional service center,” Gigabyte said in a statement.

Some early reports suggested Gigabyte was recalling the above models, but that’s not the case in the U.S. Instead, Gigabyte is taking a three pronged approach to resolving the problem:

1. Gigabyte will make its best efforts to ensure that all partners, distributors and retailers have the latest firmware (BIOS) installed on existing X79 Series Motherboard models.
2. Gigabyte’s commitment to service excellence will not be compromised. The GIGABYTE X79 Series Motherboards offer an unprecedented 5 year warranty, the longest offered in the industry. We encourage users to register for this FREE 5 year warranty here: http://e-service.gigabyte.com/Productregistration/webevent/ExtendWarranty_US.aspx
3. If any existing user is still unsatisfied after the recommended firmware (BIOS) update of their X79 Series Motherboard, Gigabyte will offer an unconditional replacement of their X79 Series Motherboard (same model). No Questions Asked.

As to the BIOS update, there are reports that it throttles the CPU when pushed too far, which will prevent things from burning up, but also gimps the boards’ overclocking potential.

Source:http://hothardware.com/News/Gigabyte-Issues-Emergency-BIOS-Update-for-Certain-X79-Series-Motherboards/

ASRock Shows Off Transformers Themed X79 Motherboard Pics

December 27th, 2011

ASRock recently posted a pair of pictures on its Facebook page that are sure to appeal to Transformers fans. One is of an X79 Optimus Prime motherboard and the other is themed after Bumblebee, also based Intel’s X79 chipset. As far as we can tell, these are concept shots and not actual boards, though if they are real, there’s a good chance both will be unveiled at CES in Las Vegas next month.

ASRock didn’t provide any specs for these boards, but other than the Transormers-themed makeover, they look identical to ASRock’s X79 Extreme9. We’re guessing the company’s design team was just having a little fun and that’s all this is, but then again, you can buy Transfomers-themed gear from Razer, such as mice and laptop covers.

Interesting sidenote: Hasbro recently filed a trademark infringement lawsuit against Asus over its Transformer Prime tablet PC, so ASRock would be well advised to tread carefully here. ASRock, which sells a range of motherboard and mini PCs, was spun off from Asus back in 2002.

Source:http://hothardware.com/News/ASRock-Shows-Off-Transformers-Themed-X79-Motherboard-Pics/

MSI’s X79A-GD45 Motherboard Supports 128GB of RAM!

December 16th, 2011

Feel like getting drunk with DRAM? Want to have the ultimate memory bragging rights? If you look up the definition of “overkill” in the dictionary, do you want to see a picture of your motherboard in there? Answer ‘yes’ to all three questions and you’re a prime candidate for MSI’s X79A-GD45 (8D) motherboard, a slice of silicon with support for an insane amount of quad-channel memory, or more specifically, up to 128GB.

No, that’s not a typo, at least not on our part. According to MSI, this board’s eight DIMM slots support up to 128GB of RAM, likely far more than you’ll ever need for the life of your system. It’s an absolutely crazy proposition for the average user, but for power users who do more than dabble in photography, CAD design, and other types of memory-heavy content creation, this is a consumer-level board with a professional-level work ethic.

The rest of the feature-set is almost standard fare by comparison, and only by comparison. It has five PCI Express x16 slots, a single PCI-E x1 slot, a par of SATA 6Gbps ports, four SATA 3Gbps ports, RAID 0/1/5/10 support, a GbE LAN port, two rear-mounted USB 3.0 ports, six rear-mounted USB 2.0 ports, audio inputs, and other odds and ends, including MSI’s Military Class III components, UEFI BIOS, THX TruStudio PRO sound, and an assortment of proprietary utilities.

Source:http://onlyhardwareblog.com/wp-admin/edit.php?s=MSI%27s+X79A-GD45+Motherboard+Supports+128GB+of+RAM!&post_status=all&mode=list

Intel Core i7-3930K And Core i7-3820: Sandy Bridge-E, Cheaper

December 9th, 2011

Core i7-3960X is undeniably fast. But at more than $1000, it’s hardly an option for most enthusiasts. We got our hands on the Core i7-3930K and Core i7-3820 to gauge their overclocked performance and determine if they’re able to best the flagship part.

Editor’s Note: As you’ll see by the end of this story, we liked the Core i7-3930K for its specific purpose quite a bit. It’s a pleasure, then, to offer four of these CPUs to our readers. Of course, we realize that the platform is still pricey, so we also have a quartet of Intel DX79SI motherboards and as many 120 GB SSD 320 drives. Four lucky winners will walk away with a trio of parts to get them started on their next machine. Read to the end of this story for your chance to win!

We love to lust after the latest hardware, no matter the cost. But when it comes time to buy, sexy takes a back seat to sensible. That’s why a thousand-dollar processor like Intel’s Core i7-3960X doesn’t really add up. According to Intel’s official price list, you can get the Core i7-3930K for exactly $416 dollars less, sacrificing 3 MB of shared L3 cache and 100 MHz in the process. There’s an Epic Meal Time phrase I could use to illustrate the intelligence of that trade-off, but I’ll just leave it as: smart.

And so today’s story is brought to you by a couple of different ideas. First, we got our hands on the other two LGA 2011-based parts: Core i7-3930K and Core i7-3820. We’ll give you the performance data on those chips running at their stock settings.

The former launched alongside Core i7-3960X, although it looks like Intel took a look at the competitive landscape, realized there wasn’t anything to contend with Sandy Bridge-E, and tacked an extra $10 onto its -3960X and $33 to its -3930K. As a result, the $550 I cited in my launch coverage is now officially $583, but closer to $600 once the online guys add their mark-up.

The latter wasn’t as easy to track down. Although Core i7-3820’s specifications are known, it’s not officially available until 2012. But since we’ve heard that a lot of really sensitive stuff gets left behind at bars, we’ve been drinking ourselves silly, hoping to scoop up a lonely Sandy-E with only half of her faculties intact.

The darnest things wind up in bars…The darnest things wind up in bars…

Sandy Bridge-E finds itself in a tough position no matter which model you flag for its potential superiority over the other two, though. Stepping away from Intel’s flagship platform, you’re faced with Sandy Bridge, the mainstream architecture we’ve praised over the last 11 months for its stock performance, reasonable cost, efficiency, and overclockability. At $1000, $600, and an undisclosed third price (a bar fly suggested $285), it’s hard to see any conceivable way to have a serious discussion about Sandy Bridge-E’s value compared to unlocked alternatives like Core i5-2500K and Core i7-2600K.

And then there’s Ivy Bridge, expected to land in the first half of next year. Informed enthusiasts have to be wary of buying into Sandy Bridge-E knowing that Ivy Bridge could deliver better performance in basic desktop applications.

How much of a threat will the quad-core Ivy Bridge-based chips be to six-core Sandy Bridge-E processors? It’s too early to say for sure, since production-quality hardware is still months away. But we were able to scoop up an Ivy Bridge-based 55 W Core i3 at the very same watering hole and run a handful of tests. My numbers are quite a bit lower than what Intel suggests on these leaked slides though, so we’re going to wait and see how the early processors evolve before posting charts. Should enthusiasts worry that Ivy Bridge will usurp their Sandy Bridge-E-based systems? I don’t think so. It kind of sucks that the high-end crowd has to wait another year or so for Ivy Bridge-E, but these two segments want different things, and a 77 W quad-core CPU isn’t going to displace a 130 W hexa-core processor in those environments.

Deriving Value From The High-End?

I read all of the comments from my review of Core i7-3960X proclaiming Sandy Bridge-E fodder for chumps with too much spare change. And although I agree insofar as Intel’s flagship isn’t the right model to buy for maximizing bang for your buck, you simply have to concede that, in threaded applications, it’s faster than both the Core i7-990X it replaces and the four-core Core i7-2600K to which it’s so easily compared. As a result, there will be affluent early adopters and professionals eager to pay top dollar for the fastest single-processor system available.

Here’s the thing, though. Having the money to spend shouldn’t compel anyone to blow it. Now that the Sandy Bridge-E launch is history and prices are publically available on sites like Newegg and TigerDirect, we can add up the cost of the parts we used and consider scaling back to save some cash.

The Intel DX79SI motherboard we used for our launch piece (and continue to use today) just hit Newegg’s virtual shelves at $280. Add to that $1050 for a Core i7-3960X and $800 for two 16 GB DDR3-1333 kits from Crucial, and you’re looking at a total of $2130 for the three platform-specific components. Now, it’s clear that the insane price of high-density memory is throwing that number off. So let’s avoid sensationalizing the bottom line and swap over to the 16 GB DDR3-2133 kit from G.Skill that I used to test memory scaling in the original story. At $180, we end up with a (relatively) more palatable $1530.

At $225, ASRock’s X79 Extreme4-M is the least-expensive (and conveniently microATX-sized) X79-based motherboard available. G.Skill’s 8 GB, DDR3-1600 Ripjaws kit isn’t particularly flashy, but it gets the job done at a capacity point we’d still consider beefy. And of course, the Core i7-3930K gets us as close to Intel’s flagship as possible without giving up any cores. The grand total? $885. That’s an almost $650 chunk off of the original setup after dropping the high-density memory kit.

Although you’re still paying nearly $400 more than the cheapest Z68-based board, the same 8 GB memory kit, and a Core i7-2700K, six cores simply aren’t available in the mainstream space. Suddenly, the prospects of a fast hexa-core beast look a lot rosier for the folks who skipped over Sandy Bridge entirely in anticipation of higher-end hardware.

Source:http://www.tomshardware.com/reviews/core-i7-3930k-3820-test-benchmark,3090.html

Get Adobe Flash playerPlugin by wpburn.com wordpress themes