As the world’s largest independent manufacturer of memory products, Kingston Technology doesn’t need much of an introduction.
The company got its start in 1987, when the computer industry was suffering from a severe shortage of surface-mount memory chips. To provide a solution, Kingston’s founders designed a new Single In-Line Memory Module (SIMM) that used readily available, older technology through-hole components.
Today, Kingston offers more than 2,000 memory products for everything from computers, servers and printers to MP3 players, digital cameras and cell phones.
One of the latest additions to Kingston’s line of USB flash drives is the DataTraveler Locker+. Developed with budget-conscious companies in mind, the DataTraveler Locker+ offers hardware-based, full disk encryption at an affordable price. Data on the drive is secured using 256-bit AES encryption and can only be accessed by entering a complex password.
To reduce the likelihood of successful brute force attacks, the DataTraveler Locker+ will lock down and reformat itself after 10 incorrect password attempts. To top it all off, the drive is compatible with both Windows 2000/XP/Vista/7 and Mac OS X and is backed by a five-year warranty.
The DataTraveler Locker+ comes packaged as shown above. While the plastic bubble gives you a great view of the drive, it can be a little hard to get open without the help of a sharp knife or razor. Once opened though, you have access to the contents. Along with the DataTraveler Locker+, you get a small lanyard which can be used to attach the drive to your keychain.
Physical Features:
While not the largest flash drive in Kingston’s lineup, the DataTraveler Locker+ definitely isn’t the smallest either. Measuring 2.58″ (65.76mm) long, 0.71″ (17.98mm) wide and 0.41″ (10.7mm) thick, its about the size of a pack of gum.
The body of the DataTraveler Locker+ is constructed of lightweight, black plastic which is protected by a metal swivel. This swivel is actually quite rugged and is screwed into the body of the drive. Instead of a cap, the swivel rotates around its axis, exposing the USB connector.
While you can’t see it in these pictures, there is a small LED is located on the bottom of the DataTraveler Locker+. This LED lights up blue whenever the drive is transmitting or receiving data or is in the identification process.
Installation:
As with most USB flash drives, the DataTraveler Locker+ was very easy to install. Those running Windows 2000, XP, Vista or 7 can simply plug the drive into any available USB port on their computer. If the computer is already turned on, plug and play will automatically detect the drive.
If installed correctly, the Locker+ will show up not as one, but two devices in Device Manager. Under Windows 7, the drive is identified as a “Kingston DTLocker+ USB Device”.
With the DataTraveler Locker+ inserted, two additional drives will appear on your computer. The first is an emulated CD-ROM that contains the embedded software. The second is the area used for data storage. This drive comes formatted with FAT32 and is not accessible until you login using your password.
Software:
While the DataTraveler Locker+ does not require you to install software on your computer, you will need to configure the device before it can be used. If you have autorun enabled on your computer, the setup wizard will automatically load when you insert the drive. After you select the language and accept the license agreement, the password setup dialog box will appear.
While not required, you can enter your name and company in the contact information window. The details box can also be used to provide additional information such as an “if found” informational message containing your email address or phone number.
Once configured, the DataTraveler Locker+ is ready to use. The embedded software will automatically launch when you plug the drive into your computer. After a few seconds, a box will pop up, asking you for your password. To access the data on your drive, simply enter your password and click Login.
If you forget your password, it can be reset. However, to protect your data, the software will format the drive. Also, the DataTraveler Locker+ will go into a “lockdown” mode after ten failed password attempts. At this point, the device must be reformatted to enable operation.
Once you are logged in, the DataTraveler Locker+ will place an icon on the system tray. Clicking on this icon will bring up a small menu. From here you can change your settings (password, contact information, language, etc), browse the contents, format the drive or shut it down so that it can safely be removed from a computer.
The test system used in this review was an HP dc7900. The computer came equipped with an Intel Core 2 Duo E8400 3.0GHz CPU, 2GB of DDR2 800MHz memory, Seagate Barracuda 7200.10 ST3250310AS 250GB SATA hard drive, NVIDIA Quadro FX570 256MB PCIe graphics card and Intel 82567LM-3 gigabit network card. For the operating system, I installed a fresh copy of Windows 7 Enterprise.
To test the performance of the DataTraveler Locker+, I ran a series of benchmarks using CrystalDiskMark 3.0, HD Tach RW 3.0.4.0, ATTO Disk Benchmark 2.43 and and SiSoftware Sandra Lite 2010.SP2. To get a feel for the “real world” performance, I also copied and pasted 500MB of random files and directories in Windows Explorer.
CrystalDiskMark 3.0:
First, I ran a few quick tests using CrystalDiskMark. This benchmark tool measures the performance of a storage device by testing its sequential read and write speeds as well as its random read and write speeds using blocks 512K and 4K in size.
Source:http://www.cdrlabs.com/Reviews/kingston-datatraveler-locker-plus-usb-flash-drive.html

