Archive for May, 2010

Bluetooth’s new, low-energy consuming avatar

May 29th, 2010

The availability of a new, low-energy consuming avatar of Bluetooth, the technology that facilitates short-range wireless communication between devices, will soon pave the way for its use in a whole new range of devices, say experts.

The Bluetooth technology is now commonly used in mobile phones, computers and many other devices.

There are three versions of this technology — the classic one that is used in a wide range of consumer devices; the Bluetooth high speed technology which is used for transfer of videos, music and photos between devices; and the low-energy technology.

In recent weeks, the Bluetooth Special Interest Group (SIG) has released more information about its forthcoming Bluetooth Core Specification Version 4.0, the highlight of which is low-energy technology.

Thanks to this technology, small devices that run on button cell batteries — the small coin-like batteries used in watches, for instance — can be equipped with Bluetooth. This means that small devices which receive data through various sensors will be able to transmit it real time to nearby gadgets like a mobile phone, laptop or computer and even a watch.

For instance, the ‘next generation’ watches will act as hubs of such information and interact with other devices, say the promoters of this technology.

So a range of button-cell powered gadgets connected with automotive and automation home entertainment, security, fitness and sports and mobile health will come enabled with this technology.

Executive director of the Bluetooth SIG Mike Foley told The Hindu, “I believe that ‘hub’-type devices [mobile phones, personal computers, and television sets] will quickly include the low energy feature of the v4.0 specification. This is because the design of low energy makes this a simple hardware upgrade to existing design.”

What are the challenges the manufacturers face in deploying the new technology?

“The chipset is designed to be a replacement for an existing Bluetooth module allowing the antenna and other components in a design to be reused. However, to take advantage of the new use cases, additional software must be created, tested and deployed. Thus, some work needs to be done to take advantage of the new capabilities supported,” Mr. Foley said.

In the home environment, information provided by sensors could probably make it easier to track happenings and trigger activities — in the kitchen, for instance.

In automobiles, such sensors could keep track of parameters like tyre pressure and alert the driver when there is need for attention.

Source:http://beta.thehindu.com/sci-tech/technology/article441597.ece

BitFenix Survivor computer case prototype exclusive hands-on

May 29th, 2010

BitFenix made the airwaves a little while ago with its launch and entry into the market highlighting itself as a high-end gaming hardware manufacturer. The team is built around well known tech people with plenty of experience in the industry from the likes of such well known past and present companies such as ABIT and CM Storm. The creation of the company is an interesting story, but best left for another time.

Yesterday we headed out to the brand spanking new BitFenix office and in our second video we got an exclusive hands-on video preview of their upcoming rugged and rubber coated Survivor mid tower computer case for gamers on the move. Again, this product was introduced to us by Swedish chap David who is the product manager and it is important to keep in mind that this particularly sample only just arrived in from the China factory and it is a prototype and not yet finished – i.e. it will go through some changes before the final retail version ships sometime in September with an estimated street price of around 140 USD.

The Survivor is like the Colossus a case like we have never seen before and it will most likely end up being the second product to be released by BitFenix. The rubber coating used is very soft and feels nice to touch. We also like the idea of the unique handle design that should make it easier for gamers to carry their system around to LAN parties and such.

Source:http://www.tweaktown.com/news/15482/bitfenix_survivor_computer_case_prototype_exclusive_hands_on/

BitFenix Colossus computer case prototype exclusive hands-on

May 29th, 2010

BitFenix made the airwaves a little while ago with its launch and entry into the market highlighting itself as a high-end gaming hardware manufacturer. The team is built around well known tech people with plenty of experience in the industry from the likes of such well known past and present companies such as ABIT and CM Storm. The creation of the company is an interesting story, but best left for another time.

Yesterday we headed out to the brand spanking new BitFenix office and got an exclusive hands-on video preview of their upcoming and really impressive Colossus full tower computer case. The product was introduced to us by Swedish chap David who is the product manager and it is important to keep in mind that this particularly sample only just arrived in from the China factory and it is a prototype and not yet finished – i.e. it will go through some changes before the final retail version ships sometime in September with a very estimated street price of around 170 USD.

The Colossus is a very hip and new breed of computer case that will come in either white or black. It is a very important product for BitFenix since it is their very first product that will go on the market; the team does not intend on rushing it and will take as long as it needs to perfect it before it goes on sale.
Followed by cases, BitFenix will also begin selling power supplies, mice and keyboards possibly by the end of this year. Watch our video above for a solid and close-up hands-on with the Colossus. BitFenix folk – remember to send me one when they are shipping!

Source:-http://www.tweaktown.com/news/15481/bitfenix_colossus_computer_case_prototype_exclusive_hands_on/

Meego v1.0 now available to download for n900 and netbooks

May 29th, 2010

That’s the operating system that was formed when Intel and Nokia decided it best to merge their respective Moblin and Maemo efforts into one system designed for mobile devices, MIDs, UMPCs, slates, and even netbooks.

Not much has been said about the software since it was initially launched, but now consumers are getting the first good look at what exactly this OS will bring.

The MeeGo 1.0 release is currently only for Nokia’s N900 handheld computer and for Intel Atom-based netbooks. All other systems will simply have to wait until they’re supported in future releases.

But there’s still plenty to enjoy, as quite a few Atom-based netbooks have been shipped to date. Basically, MeeGo for Netbooks aims to bring the basics to netbooks, and to bring speed that isn’t usually there when using Windows 7. Let’s face it: Windows 7 is a full-on desktop OS, and it was hardly designed to work best on lowly 1.6GHz Atom CPUs with 1GB of RAM. You really need more power to really enjoy Windows 7, and that’s where MeeGo comes in.

Early reports have shown that the OS really flies on even the most basic netbook hardware, and even though the user interface is far simpler than in Windows 7, that simplicity leads to increased speed. And on a netbook, when all you need is to access the Internet, a few Office-type apps and maybe a chat client, all you need are the basics.

We’re pretty excited to see what MeeGo will bring to the fold. It has been awhile since a real OS has emerged to compete with Windows, and while the mobile OS space is crowded (iPhone OS, Android, Windows Phone 7, Symbian, etc.), the netbook/UMPC space is wide open.

The 1.0 build is available to download now, but obviously you should back up all of your important files before just blasting ahead with a foreign OS. After you’ve done that, go right ahead and see if this is a suitable alternative to Win7–did we mention that it’s free to download and install?

Source:http://hothardware.com/News/MeeGo-v10-Now-Available-To-Download-For-N900-And-Netbooks/

Magix audio cleaning lab 16. format

May 29th, 2010

http://www.thenorthernecho.co.uk/leisure/8192744.MAGIX_AUDIO_CLEANING_LAB_16__Format__PC__Price____29_99_/

Eye tv hd rips to mac, streams to ipad

May 29th, 2010

There are a handful of ways to record TV to your computer using an external video card or over-the-air tuner. Only one method, however, promises HD-quality recording and an iPad-compatible app for streaming your recordings over the air. It’s called the Elgato EyeTV HD, it’s Mac-only, and it’s available now for $199.

The sandwich-size hardware isn’t much to look at, but put it between your Mac and your cable/satellite box and you’ve got a powerful tool for capturing the TV you’re already paying for.

The box sports component and S-video inputs capable of 1080i capture resolution or 720p. There’s no HDMI, but by going analog, users are able to escape the headaches of digital video DRM. The EyeTV HD is bus-powered, so all it needs to get the job done is an available USB 2.0 port on your Mac.

The EyeTV HD comes with recording schedule software powered by TV Guide. A plug-in IR blaster communicates between your EyeTV and your cable box to tune in the appropriate channel when a show is ready to rip. Unfortunately, scheduled recording of over-the-air transmissions is a no-go.

Thanks to hardware acceleration, the EyeTV HD can simultaneously encode two versions of any incoming video: one optimized for HD playback on your Mac, iPad, or Apple TV; and a smaller file for use with an iPhone or iPod. Recordings are made in the h.264 video format with a maximum resolution of 1920?1080 pixels at 30 fps.

The killer feature, though, is that iPad, iPhone, and iPod Touch users never really need to sync to their computer to transfer their recorded content. By installing the optional EyeTV app ($4.99), users can stream live TV or any of their recordings over the internet from their computer using Wi-Fi or 3G. The same app can be used to dive into your recording schedule and make changes.

If you’re a Mac-having TV addict who isn’t already outfitted with a TiVo and a Slingbox, the Elgato EyeTV HD may be just the solution for taking your favorite shows on the go.

Source:http://news.cnet.com/8301-17938_105-20006330-1.html

Bigfoot networks, powercolor team up to build a gaming combo card

May 29th, 2010

You know Bigfoot Networks as the company behind the Killer NIC series, which are cards designed to improve your ping, Internet connection, and even your framerates while gaming online. Many consider a dedicated NIC to be of dubious value, but would you feel the same way if it came integrated onto your videocard?

That’s a question Bigfoot Networks and TUL (otherwise known as PowerColor) aim to find out. The two companies are working together on a combo card that will combine “best of breed PC graphics and networking for online gaming.” They already have a prototype avaiable and plan to show it off during Computex in early June.

According to Bigfoot Networks, the combo card is built around ATI’s HD 5000 graphics family. For what it’s worth, Bigfoot is making much ado over this being the “world’s first single card, PCI Express solution combining Bigfoot Networks Killer 2100 Gaming Network Card technology” and ATI’s aforementioned graphics.

Computex runs from June 1-5, at which point we’ll have more info on this.

Source:http://techfreqnews.com/sample-post/1422

Get Adobe Flash playerPlugin by wpburn.com wordpress themes